MITSUBISHI
LR-LINK
JMC
ADVANTECH
PANASONIC
OMRON
PC MINI
DELTA
INOVANCE
LEADSHINE
MÁY TỰ ĐỘNG
SAMWON
YASKAWA
Cảm biến khoảng cách laser Sick DL1000-S11110
Cảm biến khoảng cách laser Sick DL1000-S11110
Measurement principle
HDDM+
Measuring range
0.2 m … 1,500 m, on “diamond grade” reflective tape 1) 2) 3)
Target
Reflector
Resolution
0.001 mm … 100 mm, adjustable 4)
Repeatability
≥ 1 mm, See repeatability characteristic lines 1) 5) 6) 7)
Measurement accuracy
Typ. ± 15 mm, See measurement accuracy diagram 8)
Response time
3 ms … 384 ms 7)
Measurement cycle time
1 ms
4 ms
16 ms
Output time
≥ 1 ms 9)
Light source
Infrared light (905 nm, measuring laser)
Visible red light (650 nm, Adjustment aid)
Laser class
1, even with simultaneous operation of measurement and alignment laser (IEC 60825-1:2014, EN 60825-1:2014)
Typ. light spot size (distance)
5 mm x 20 mm (at 1 m) 10)
20 mm x 20 mm (at 5 m) 10)
35 mm x 25 mm (at 10 m) 10)
150 mm x 50 mm (at 50 m) 10)
290 mm x 80 mm (at 100 m) 10)
570 mm x 140 mm (at 200 m) 10)
4,200 mm x 920 mm (≥ 1,500 mm) 10)
Filter
Rain and snow filter
Fog filter
Moving average distance value
Kalman filter
Moving average speed value
Additional function
Selection of relevant distance and signal level range
Selection of first or last echo in selected distance and signal level range
Average laser service life (at 25 °C)
100,000 h 11)
Max. movement speed
128 m/s
Safety-related parameters
MTTFD
101 years
DCavg
0%
1) With max. ambient light 100 kLux sunlight.
2) See measuring range diagram.
3) Dependent on reflector size and measuring cycle time.
4) Data interface resolution.
5) Statistical error 1 σ, environmental conditions constant, min. warm-up time > about 15 min.
6) On “diamond grade” reflective tape.
7) Dependent on selected filter settings and measuring cycle time.
8) At T = +23 °C and after warm-up time > about 15 min.
9) Depending on interface used.
10) See light spot size diagram.
11) Measuring laser.
Technical drawings
Working range diagram DL1000 measuring range based on measurement cycle time and reflector type
PIN assignment Connection 2: Ethernet/IP (port 1)
PIN assignment…
